Project Description
Our client has ports in their conductors. The purpose of these ports were to remove cuttings in case drilling was necessary when installing conductors. After conductor installation the port collar plugs were installed from inside. IK-Group has installed 4 conductor sealing clamps to seal over leaking or missing port collar plugs in the 28” conductors.
Operational Parameters
- Size: 725,9mm (OD Nominal) (25.58")
- Design Pressure: 10 bar
- Test Pressure: 15 bar
- Depth: 12-34 meter below MSL
- Installation method: ROV Installable
- Anode Type: Aluminum Zinc
- Design Life: 20 Years
Delivery
- No. of clamps Delivered: 5
- No. of clamps installed: 4
- Delivery time: 4 weeks
